Engineering resilience against thermal expansion. Specialized universal joint shafts designed to withstand the extreme heat, humidity, and continuous torque demands of Dutch paper and board mills.
The Thermodynamic Challenge of the Dryer Section
In the integrated landscape of the Dutch pulp and paper industry—from the graphical paper giants in Maastricht to the packaging board specialists in the Eerbeek cluster—the dryer section represents the most thermodynamically aggressive environment for power transmission. While the wet end battles corrosion, the dryer section fights a war against heat and geometry. As steam-heated cylinders reach surface temperatures of 160°C to 180°C, the massive steel framework of the paper machine undergoes significant thermal expansion.
For a drive shaft connecting the gear reducer to the dryer cylinder journal, this thermal growth creates a critical mechanical conflict. As the frame expands, the distance between the drive and the driven unit changes. If the drive shaft cannot telescope (extend or compress) with near-zero friction under full torque load, it acts as a rigid strut. This transfers massive axial thrust loads directly into the dryer bearings and gearbox output shafts. The result is catastrophic: premature bearing failure, steam joint leaks, and unscheduled downtime in a continuous process industry where every minute costs thousands of Euros.
EVER-POWER addresses this specific failure mode with our High-Temp Telescopic Universal Joint Shafts. Engineered with advanced tribological coatings on the spline profiles and high-temperature sealing systems, these shafts ensure free axial movement even when transmitting the high torque required to turn water-laden felt and paper sheet.
Technological Imperatives for Dryer Drives
열 보상
Standard shafts seize at high temperatures. Our shafts feature Long-Stroke Splines coated with Rilsan (Polyamide 11) or Molybdenum Disulfide. This reduces the coefficient of friction by up to 60%, allowing the shaft to telescope smoothly as the machine frame expands by centimeters during startup.
High-Temp Lubrication
Conventional grease carbonizes (turns to solid ash) above 120°C, leading to “Black Death” in bearings. We utilize Perfluoropolyether (PFPE) based lubricants that remain stable up to 250°C, ensuring liquid film protection for needle bearings inside the steam-heated hood.
Humidity Resistance
The dryer section is humid due to evaporating water from the paper sheet. We implement a Multi-Stage Labyrinth Seal system with Viton (FKM) lips. This prevents moisture ingress that causes internal rust pitting, a primary cause of premature U-joint failure.
Client Success: Revitalizing a Packaging Board Mill in Gelderland
도전 과제: A major producer of corrugated base paper in the Gelderland region faced chronic gearbox failures in their pre-dryer section. Analysis revealed that the existing drive shafts were seizing axially during the machine’s warm-up phase. The rigid force transfer was destroying the input bearings of the cylinder gearboxes every 8 months.
해결책: EVER-POWER engineers conducted a thermal growth analysis of the machine frame. We replaced the standard shafts with our Custom SWC-I High-Temp Series. These featured an extended spline stroke (+40mm capacity) with a proprietary low-friction glide coating. We also implemented a remote lubrication system to allow safe regreasing during operation.
결과: Since the retrofit 24 months ago, the mill has experienced zero gearbox failures related to axial thrust. Vibration levels dropped by 35%, and the maintenance interval for the drive shafts was extended from 6 months to 18 months, aligning with their major shutdowns.
Technical Parameters: Dryer Section Series
| 매개변수 범주 | 사양 범위 | 공학적 관련성 |
|---|---|---|
| 공칭 토크(Tn) | 5 kNm – 120 kNm | Sized for Yankee and Multi-Cylinder drives. |
| Ambient Temperature | Up to 180°C (Inside Hood) | Dictates seal material and grease selection. |
| 길이 보정 | Standard 100mm / Custom 400mm+ | Absorbs machine frame thermal growth. |
| 작동각 | Usually ≤ 5° | Keeps vibration low at high paper speeds. |
| 핵심 소재 | 42CrMo4 / SAE 4140 | High tensile strength at elevated temps. |
| 밀봉재 | Viton (FKM) / Silicon | Resists hardening and cracking in heat. |
| 균형 잡힌 품질 | G6.3 / G2.5 (ISO 1940) | Essential for speeds > 600 RPM. |
2025 Global Top 10 Pulp & Paper Drivetrain Manufacturers
Recognizing excellence in reliability and innovation for the global paper industry.
OEM 맞춤 제작 및 공장 역량
Paper machines have lifespans measured in decades. Replacing drive shafts on a 1990s Voith or Valmet machine often requires customization that standard catalogs cannot provide. EVER-POWER offers full OEM-grade customization.
- 플랜지 매칭: We machine flanges to exact DIN, SAE, or Face Key specifications to fit existing gearboxes without modification.
- 동적 균형 조정: In-house balancing up to 5,000 RPM ensures vibration-free operation for high-speed tissue machines.
- 신속 프로토타이핑: We can reverse-engineer worn shafts from drawings or physical samples within 48 hours.
보완적인 구동계 솔루션
산업용 기어박스
Heavy-duty helical and bevel-helical gearboxes designed for the continuous torque of dryer cylinders.
기어 커플링
Rigid couplings for motor-to-gearbox connections, ensuring zero-backlash transmission in confined spaces.
Expert Answers: Paper Machine Drivetrains
How do I prevent “Black Death” grease failure in my dryer section shafts?
What is the typical lead time for a custom dryer section drive shaft to the Netherlands?
Can your shafts replace existing GKN or Voith units without machine modification?
How much thermal expansion can your telescopic shafts accommodate?
© 2026 EVER-POWER Transmission. 모든 권리 보유. | 글로벌 제지 산업에 최적화.
면책 조항: 모든 제조업체 이름, 기호 및 설명은 참조 목적으로만 사용되며, 나열된 부품이 해당 제조업체의 제품임을 의미하는 것은 아닙니다.
