China Universal Double Cardan Shaft for Heavy Equipment pto shaft parts

Solution Description

Telescopic flange extended cardan shaft Coupling(SWP-A)

Merchandise Description

SWP partition profile bearing the cross shaft universal coupling items: replacement of bearings for, SWP sort cardan layout bearing split shaft bolt, ideal for hoisting and conveying machinery and other hefty equipment, connecting 2 different axis transmission shaft, axis angle of A~F sort not a lot more than 10 degrees, the G sort is not greater than 5 degrees.

Item Parameters

♦Basic Parameter And Primary Dimension

Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch length S mm	Measurement(mm)										Rotary inertia kg·m²		Mass kg
Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch length S mm	Lmin	D1 js11	D2 H7	D3	E	E1	B×h	h1	L1	n-d	Lmin	Increase a hundred	Lmin	Enhance one hundred
SWP160A	one hundred sixty	sixteen	eight	≤10	fifty	660	140	95	114	fifteen	four	20×12	6	85	six-13	.13	.0059	47	two.1
SWP180A	a hundred and eighty	twenty	ten	≤10	sixty	752	a hundred and fifty five	105	121	fifteen	four	24×14	7	95	6-fifteen	.22	.0072	60	2.three
SWP200A	200	31.5	sixteen	≤10	70	823	175	one hundred twenty five	17	17	five	28×16	8	110	eight-fifteen	.37	.0114	81	three.four
SWP225A	225	forty	twenty	≤10	76	933	196	135	152	20	five	32×18	nine	one hundred thirty	eight-seventeen	.63	.5710	109	6.six
SWP250A	250	sixty three	31.5	≤10	eighty	978	218	one hundred fifty	168	25	5	40×25	twelve.five	135	eight-19	one.02	.0407	147	seven.3
SWP285A	285	ninety	45	≤10	100	1133	245	170	194	27	7	40×30	fifteen	150	eight-21	2.17	.0702	241	9.four
SWP315A	315	a hundred and forty	63	≤10	a hundred and ten	1250	280	185	219	32	seven	40×30	15	170	ten-23	3.86	.1144	322	12.
SWP350A	350	a hundred and eighty	ninety	≤10	120	1380	310	210	245	35	8	50×32	sixteen	185	ten-23	6.66	.1663	428	13.six
SWP390A	390	250	112	≤10	a hundred and twenty	1495	345	235	273	40	eight	70×36	eighteen	205	10-25	11.53	.2695	566	18.
SWP435A	435	355	a hundred and sixty	≤10	150	1710	385	255	299	42	10	80×40	twenty	235	16-28	21.eighty one	.3645	932	20.
SWP480A	480	450	224	≤10	a hundred and seventy	1910	425	275	351	47	12	90×45	22.5	265	16-31	38.04	.7571	1294	28.
SWP550A	550	710	315	≤10	a hundred ninety	2135	492	320	402	fifty	12	100×45	22.5	290	sixteen-31	sixty one.28	one.1842	1744	35.7
SWP600A	600	1000	500	≤10	210	3580	544	380	450	fifty five	15	90×55	27.five	360	22-34	98.63	one.7159	2330	40.five
SWP640A	640	1250	630	≤10	230	2685	575	385	480	sixty	15	100×60	30	385	eighteen-38	167.67	2.3080	3153	forty eight.3

·Notice:L is the size of set up,which includes the price of S/Z shrinkage.

Detailed Images

Packaging & Shipping

Organization Profile

HangZhou CZPT Equipment Manufacturing Co., Ltd. is a substantial-tech company specializing in the style and manufacture of a variety of types of coupling. There are 86 personnel in our company, like 2 senior engineers and no less than 20 mechanical style and manufacture, heat therapy, welding and other pros.

Innovative and reasonable approach, complete detection means. We company actively introduce international advanced technology and gear, on the foundation of the problem, we make full use of the advantage and do a lot more investigation and innovation. Stringent to higher quality and run strictly in accordance with the ISO9000 quality certification technique normal manner.

Our company supplies various kinds of merchandise. Large quality and reasonable price. We stick to the theory of “quality first, support initial, steady advancement and innovation to meet the consumers” for the management and “zero defect, zero complaints” as the high quality aim.

After Product sales Service

1.Layout Solutions
Our design staff has encounter in cardan shaft relating to item design and style and advancement. If you have any demands for your new merchandise or wish to make more enhancements, we are right here to offer you our assistance.

two.Solution Services
uncooked supplies → Reducing → Forging →Rough machining →Shot blasting →Heat remedy →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3.Samples Process
We could produce the sample in accordance to your requirement and amend the sample constantly to satisfy your need to have.

4.Analysis & Advancement
We usually investigation the new needs of the market place and produce the new product when there is new vehicles in the market place.

five.Top quality Handle
Every action should be specific test by Professional Personnel in accordance to the standard of ISO9001 and TS16949.

FAQ

Q 1: Are you trading business or producer?
A: We are a expert producer specializing in producing
different collection of couplings.

Q 2:Can you do OEM?
Of course, we can. We can do OEM & ODM for all the consumers with tailored artworks of PDF or AI structure.

Q 3:How prolonged is your shipping and delivery time?
Typically it is twenty-30 times if the products are not in stock. It is according to quantity.

Q 4: Do you provide samples ? Is it cost-free or extra ?
Sure, we could offer you the sample but not for free of charge.In fact we have a extremely great cost principle, when you make the bulk order then value of sample will be deducted.

Q 5: How prolonged is your warranty?
A: Our Guarantee is twelve thirty day period under typical circumstance.

Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.

Q 7: Do you have inspection methods for coupling ?
A:100% self-inspection before packing.

Q 8: Can I have a check out to your factory prior to the purchase?
A: Confident,welcome to check out our factory.

Q 9: What’s your payment?
A:1) T/T.

♦Make contact with Us
Web: huadingcoupling
Incorporate: No.11 HangZhou Road,Chengnan park,HangZhou Town,ZheJiang Province,China

/ Piece
| 1 Piece

(Min. Order)

###

Standard Or Nonstandard:	Standard
Shaft Hole:	as Your Requirement
Torque:	as Your Requirement
Bore Diameter:	as Your Requirement
Speed:	as Your Requirement
Structure:	Flexible

###

Customization:	Available \|

###

Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch length S mm	Size(mm)										Rotary inertia kg·m²		Mass kg
Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch length S mm	Lmin	D1 js11	D2 H7	D3	E	E1	B×h	h1	L1	n-d	Lmin	Increase 100	Lmin	Increase 100
SWP160A	160	16	8	≤10	50	660	140	95	114	15	4	20×12	6	85	6-13	0.13	0.0059	47	2.1
SWP180A	180	20	10	≤10	60	752	155	105	121	15	4	24×14	7	95	6-15	0.22	0.0072	60	2.3
SWP200A	200	31.5	16	≤10	70	823	175	125	17	17	5	28×16	8	110	8-15	0.37	0.0114	81	3.4
SWP225A	225	40	20	≤10	76	933	196	135	152	20	5	32×18	9	130	8-17	0.63	0.0290	109	6.6
SWP250A	250	63	31.5	≤10	80	978	218	150	168	25	5	40×25	12.5	135	8-19	1.02	0.0407	147	7.3
SWP285A	285	90	45	≤10	100	1133	245	170	194	27	7	40×30	15	150	8-21	2.17	0.0702	241	9.4
SWP315A	315	140	63	≤10	110	1250	280	185	219	32	7	40×30	15	170	10-23	3.86	0.1144	322	12.0
SWP350A	350	180	90	≤10	120	1380	310	210	245	35	8	50×32	16	185	10-23	6.66	0.1663	428	13.6
SWP390A	390	250	112	≤10	120	1495	345	235	273	40	8	70×36	18	205	10-25	11.53	0.2695	566	18.0
SWP435A	435	355	160	≤10	150	1710	385	255	299	42	10	80×40	20	235	16-28	21.81	0.3645	932	20.0
SWP480A	480	450	224	≤10	170	1910	425	275	351	47	12	90×45	22.5	265	16-31	38.04	0.7028	1294	28.0
SWP550A	550	710	315	≤10	190	2135	492	320	402	50	12	100×45	22.5	290	16-31	61.28	1.1842	1744	35.7
SWP600A	600	1000	500	≤10	210	3580	544	380	450	55	15	90×55	27.5	360	22-34	98.63	1.7159	2330	40.5
SWP640A	640	1250	630	≤10	230	2685	575	385	480	60	15	100×60	30	385	18-38	167.67	2.3080	3153	48.3

/ Piece
| 1 Piece

(Min. Order)

###

Standard Or Nonstandard:	Standard
Shaft Hole:	as Your Requirement
Torque:	as Your Requirement
Bore Diameter:	as Your Requirement
Speed:	as Your Requirement
Structure:	Flexible

###

Customization:	Available \|

###

Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch length S mm	Size(mm)										Rotary inertia kg·m²		Mass kg
Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch length S mm	Lmin	D1 js11	D2 H7	D3	E	E1	B×h	h1	L1	n-d	Lmin	Increase 100	Lmin	Increase 100
SWP160A	160	16	8	≤10	50	660	140	95	114	15	4	20×12	6	85	6-13	0.13	0.0059	47	2.1
SWP180A	180	20	10	≤10	60	752	155	105	121	15	4	24×14	7	95	6-15	0.22	0.0072	60	2.3
SWP200A	200	31.5	16	≤10	70	823	175	125	17	17	5	28×16	8	110	8-15	0.37	0.0114	81	3.4
SWP225A	225	40	20	≤10	76	933	196	135	152	20	5	32×18	9	130	8-17	0.63	0.0290	109	6.6
SWP250A	250	63	31.5	≤10	80	978	218	150	168	25	5	40×25	12.5	135	8-19	1.02	0.0407	147	7.3
SWP285A	285	90	45	≤10	100	1133	245	170	194	27	7	40×30	15	150	8-21	2.17	0.0702	241	9.4
SWP315A	315	140	63	≤10	110	1250	280	185	219	32	7	40×30	15	170	10-23	3.86	0.1144	322	12.0
SWP350A	350	180	90	≤10	120	1380	310	210	245	35	8	50×32	16	185	10-23	6.66	0.1663	428	13.6
SWP390A	390	250	112	≤10	120	1495	345	235	273	40	8	70×36	18	205	10-25	11.53	0.2695	566	18.0
SWP435A	435	355	160	≤10	150	1710	385	255	299	42	10	80×40	20	235	16-28	21.81	0.3645	932	20.0
SWP480A	480	450	224	≤10	170	1910	425	275	351	47	12	90×45	22.5	265	16-31	38.04	0.7028	1294	28.0
SWP550A	550	710	315	≤10	190	2135	492	320	402	50	12	100×45	22.5	290	16-31	61.28	1.1842	1744	35.7
SWP600A	600	1000	500	≤10	210	3580	544	380	450	55	15	90×55	27.5	360	22-34	98.63	1.7159	2330	40.5
SWP640A	640	1250	630	≤10	230	2685	575	385	480	60	15	100×60	30	385	18-38	167.67	2.3080	3153	48.3

PTO Shaft Safety Chains

PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
> Shaft Collar

Safety chains

<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.

Shield

A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
Shaft Collar

IID shaft guard

The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.

Overrunning clutch

An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Shaft Collar

Direction of rotation

Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
China Universal Double Cardan Shaft for Heavy Equipment pto shaft parts
editor by CX 2023-03-31

Tractor pto shaft

As one of leading tractor pto shaft manufacturers, suppliers and exporters of mechanical products, We offer tractor pto shaft and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of tractor pto shaft.