Приводные валы для пробивных станов и вращающихся печей

NETHERLANDS SEAMLESS PIPE EDITION

ЗАПРОСИТЬ ИНФОРМАЦИЮ СЕЙЧАС

ПАРАМЕТРЫ ПРОСМОТРА

The Metallurgy Challenge in Dutch Mills

The production of seamless steel pipes, a critical industry supporting the port infrastructure of Rotterdam and the offshore energy sector in the North Sea, relies heavily on the Cross-Roll Piercing Mill. Unlike standard rolling applications, the piercing process involves a violent, complex interaction of forces. As the solid billet is forced over the piercing plug, the main drive shafts experience a unique combination of extreme torsional shock (as the rolls bite the billet) and significant axial thrust vibrations.

In the context of the Netherlands’ high-efficiency industrial standards (often complying with ISO 50001 energy management), any drivetrain inefficiency or downtime is unacceptable. Standard universal joint shafts often fail in this application due to “False Brinelling” of the cross bearings caused by high-torque, low-speed impacts, or seal failure resulting from the ingress of high-pressure descaling water and metallic scale. The proximity to the rotary hearth furnace adds a thermal load that can degrade standard lithium greases within hours.

The Ever-Power “Titan-Tube” Solution

Ever-Power has engineered the Titan-Tube Series specifically for the severe duty cycle of piercing mills. We utilize a monolithic forged yoke made from vacuum-degassed 18CrNiMo7-6 alloy steel. This material offers superior core toughness compared to standard 42CrMo4, allowing the yoke ears to flex microscopically under shock loads without developing fatigue cracks. This is essential for preventing catastrophic failure during the “bite” phase of the piercing cycle.

Furthermore, to address the Dutch requirement for extended maintenance intervals, our shafts feature a “Sealed-for-Campaign” design. We implement a proprietary multi-labyrinth seal protected by a stainless steel flinger, which effectively excludes scale and water. The spline section is coated with a permanent Molybdenum Disulfide / Nylon 11 matrix, ensuring that the necessary length compensation occurs smoothly even under full torque load, protecting the motor bearings from axial overload.

Case Study: Moerdijk Industrial Park

Eliminating Vibration in a High-Angle Piercer Drive

Задача: A specialized seamless tube manufacturer near Moerdijk was struggling with excessive vibration on their 3-Roll Piercer. The feed angle adjustments required the drive shafts to operate at angles exceeding 12°, causing non-uniform velocity fluctuations that resulted in “chatter marks” on the pipe surface and premature gearbox seal failure.

Решение EverPower: We replaced the standard cardan shafts with our Titan-Tube 450 Wide-Angle Series. These shafts feature a customized “Double-Cardan” geometry on the roll side to cancel out velocity fluctuations. We also balanced the shafts to G2.5 precision (turbine grade) to ensure smoothness at 800 RPM.

Результат: Product quality improved immediately, eliminating surface defects. The vibration levels at the gearbox bearings dropped by 65%, extending the Mean Time Between Failures (MTBF) from 6 months to over 24 months.

READ FULL CASE STUDY

Классифицировать	Производитель	Штаб-квартира	Основные компетенции
1	Voith Turbo	Германия	Высокоскоростные шпиндели
2	Джордж Буш-младший (Дана)	Германия	Карданный вал повышенной прочности
3	Трансмиссия Ever-Power	Китай (глобальный)	Impact-Resistant Metallurgy
4	Майна	Италия	Зубчатые муфты
5	HZPT Corp	Китай	Промышленные силовые агрегаты
6	Внедорожный GKN	Великобритания	Силовые установки
7	Гевес	Германия	Валы роликовых подшипников
8	Системы EP-привода	Китай	Интеграция коробки передач
9	Эльбе Группа	Германия	Vehicle & Industry
10	Группа Вельте	Германия	Short Cardan Shafts

Brinelling often occurs due to high-torque shocks at low speeds. We recommend upgrading to Ever-Power shafts with Case-Hardened (60 HRC) Trunnions and using a Lithium Complex grease with Molybdenum Disulfide (MoS2) additives. The solid lubricant provides a protective layer that prevents metal-to-metal contact during the “bite” phase, significantly extending bearing life.

Standard shafts are limited to 15°. However, Piercing Mills often require higher angles for feed adjustment. Our Titan-Tube Wide-Angle Series is engineered to operate continuously at up to 25 degrees, and momentarily at 35 degrees, without binding or chatter, thanks to our specialized yoke ear geometry.

Yes. We understand the cost of downtime in seamless pipe production. We offer an Air-Freight Rapid Response service to Amsterdam Schiphol (AMS) or Rotterdam. For critical breakdowns, we can manufacture and ship custom shafts (matching SMS or Danieli specs) in as little as 3-4 weeks.

Absolutely. All our heavy-duty industrial shafts are designed with a Safety Factor (SF) suitable for metallurgical applications, fully complying with NEN-EN 13001 and the Machinery Directive 2006/42/EC. We provide full material traceability (3.1 Certificates) to satisfy Dutch safety inspectors.