Product Description
Product Description
Product Parameters
| Models | Working Width (mm) | PTO Input Speed (rpm) | Hammer Blades (N.) | Rotor | Required | Shipped | Overall |
| Speed | HP | Weight | Dimensions | ||||
| (rpm) | (hp) | (kg) | (mm) | ||||
| EFGCH140 | 1350 | 540 | 18 | 2160 | 35-70 | 312 | 1570*800*780 |
| EFGCH160 | 1550 | 540 | 22 | 2160 | 45-100 | 330 | 1770*800*780 |
| EFGCH180 | 1750 | 540 | 24 | 2160 | 60-100 | 351 | 1970*800*780 |
| EFGCH200 | 1950 | 540 | 28 | 2160 | 70-100 | 369 | 2170*800*780 |
| EFGCH220 | 2150 | 540 | 32 | 2160 | 80-100 | 390 | 2370*800*780 |
Detailed Description
Product introduction of hydraulic side-moving lawn mower (EFGCH)
I. Functions:
1. Broken grass to the field
2. Broken branches to the field
3 A modern integrated management machine designed for large and medium-sized sites of more than 5 mu that can complete the operation of crushing grass, crushing straw and crushing branches through handle operation, avoiding tree trunk and other obstacles.Equipped with high-power transmission, high strength suspension, high efficiency transmission shaft and high strength hammer knife, there are a variety of models available, including 1.35 meters, 1.55 meters, 1.75 meters, 1.95 CZPT and 2.15 meters, suitable for 1.2 CZPT to 1.6 CZPT of row spacing.Equipped with tractors above 35 horsepower can be used.Can easily adjust the stubble height, the range of 2-5 cm, and can be customized.Operation does not hurt the ground cloth, drip irrigation belt, with a number of operation safety protection mechanism, can be adjusted and balanced.Whether in use, maintenance or operation safety, we have given a comprehensive consideration in the design.
The application of raw grass technology is conducive to soil moisture conservation, reduce diseases and insect pests, and improve the content of soil organic matter.At the same time, it is also conducive to earthworm reproduction, and to increase soil permeability and improve soil mass structure through grass roots and earthworms.More help to reduce the application of chemical fertilizer, to avoid soil acid and base imbalance and hardening.
II. Product Features:
1. Be able to complete the operation of broken grass, broken straw and broken branches with a higher coverage rate.Adjustable hydraulic side shift, changing the cutting position, allowed to extend under the branches, into the ditches, under the fence, on the pond bank, and in any other places where the tractor is not suitable or unable to move safely.
2. Easy access in operation.Use the standard hydraulic system without modifying the tractor.
3. The overall operation cost is low.Machine structure design is simple, easy to maintain; directly crushed back to the field, natural fermentation into organic fertilizer, reduce labor costs; 100~200 mu a day, improve work efficiency.
4. The streamlined design of the shell edge of the whole machine to avoid scraping the fruit when contacting the fruit branches and beautiful shape.
5. Design of safety protection devices, including pulley protection cover plate, beyond the clutch, drive shaft shear pin, and hammer knife baffle, to prevent the blade from throwing out.
6. High-quality chrome-plated optical shaft, small friction coefficient, wear resistance, large hardness, good heat resistance and corrosion resistance, to ensure the smooth operation in the process of lateral shift and return.
7. Choose an extended oil cylinder with a buffer device for excellent stability.
8. Imported high-quality triangle belt, using special textile canvas, improve the bending, zigzag heat resistance, better impact resistance, can be used in harsh use conditions, high transmission efficiency, can also be stable use in harsh conditions.
9. Gearbox operates with low noise and has passed ISO9001:2008, SGS, ROHS, etc.The box is made of QT450, with a gear shaft of 20CrMnTi, with higher strength, high toughness and high fatigue resistance characteristics.
10. The segmented transmission shaft adopts wide Angle fork head, stable delivery, low noise, convenient installation, disassembly and maintenance, with large Angle compensation ability, transmission shaft joints and forks are used 45 # steel forging, compact and reasonable structure, transmission efficiency as high as 98-99.8%, energy saving effect is obvious.
11. The bearings are from HangZhou axis Group (one of the 3 major production bases of bearing industry in China) with 2 columns of rollers, mainly bearing radial load, but also bearing axial load in any direction.The outer circle and the roller have linear contact, with small friction coefficient and high radial load capacity, especially suitable for heavy load or vibration load operation.
12. The whole machine is made of high quality paint, stored in the open air, and the whole screw level is above 8.8.
III. Scope of application:
1. Implement all kinds of orchards with planting grass and natural grass.
2. Organic ecological park, fruit demonstration park, horticultural standardization garden and sightseeing picking garden.
3. Fruit professional cooperatives and forestry and fruit technical service teams shall provide production services to the members.
4. All kinds of ecological agricultural and forestry parks without weeding and weeding.
5. Municipal, garden, nursery and solar power station grass cutting maintenance.
Packing & Shipping
Company Profile
ZheJiang Jitian International Trade Co., LTD, a wholly-owned subsidiary of ZheJiang Jitian Agricultural Machinery Group Co., Ltd was established in 2571 and is located in HangZhou, ZheJiang province, enjoying convenient transportation and beautiful environment. Our company covers an area of 12,000 square CZPT and has 80 employees. We are specialized in the supply of agricultural machinery and its accessories.
FAQ
1. Who are we?
We are based in ZheJiang , China, start from 2571,sell to Southeast Asia(30.00%),Africa(30.00%),Eastern Asia(15.00%),North
America(10.00%),South Asia(10.00%),Mid East(5.00%). There are total about 11-50 people in our office.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
Tractor,Generator Set,Diesel Engine,Feed Machinery,Reel Irrigation
4. Why should you buy from us not from other suppliers?
Member of China Agricultural Machinery Circulation Association, Member of ZheJiang Agricultural Machinery Circulation Association,
China Agricultural Machinery Circulation and Marketing First-Class Enterprise.
5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| After-sales Service: | Lifelong After-Sales Guidance |
|---|---|
| Warranty: | 1 Year |
| Certification: | CE |
| Samples: |
US$ 1295/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
Safety Precautions For a PTO Shaft
When you are working around PTOs, be sure to observe several safety precautions. These include removing the shield, keeping a safe distance from the machine, and avoiding entanglement. Entanglement is a serious injury that can even lead to death. Workers who are near the machine should always maintain a safe distance, especially if the speed of the machine is fast enough to entangle clothing. The speed of the PTO is usually 540 to 1,000 revolutions per minute, and the speed is enough to cause injury in a split second.
Safety precautions
One of the most important safety precautions for a PTO shaft is to make sure that it is properly guarded at all times. An unguarded PTO shaft can entanglement a worker, cause an injury, or even cause death. Operator awareness is key in preventing this hazard. Among other things, workers should not make repairs while the PTO is in use or wear loose or frayed clothing when working near the PTO. Likewise, they should read and follow instructions provided with their tractor and implement. Finally, they should use PTO shafts only for their intended purpose.
Another important safety precaution is to wear a protective gear such as a helmet and gloves before operating a PTO shaft. This type of equipment can be extremely dangerous because of its speed. A PTO shaft that is rotating at 540 rpm can travel two metres in less than a second. Damaged shielding is a common cause of entanglement, so it is important to check your machinery for damage before operating it.
When operating a tractor, PTOs should be kept clear of loose clothing. Loose clothing can easily catch on a rotating PTO shaft. Long hair or jewelry can also become entangled in a PTO shaft. It is also important to remember to secure the PTO shaft guard when the tractor is not in use. Also, never engage a PTO when the engine is off.
Types of pto shafts
PTO shafts are used in tractors and other equipment to secure the secondary gear in the tractor. They are available in different styles and sizes. These shafts are designed to withstand pressure, impacts, and tension. They may also include a shear pin and slip clutch. Before buying a new PTO shaft, make sure to check its measurements.
There are two types of PTO shafts available in an Agric rototiller. The first one has a slip clutch and the other has a shear pin safety device. In order to identify the type of PTO shaft used in a particular tractor, it is important to understand what it is used for.
There are two types of PTO shafts: the external and internal. The latter is used for larger machines, such as a lawnmower. The former is suitable for agricultural applications and is the preferred type for large tractors. The former is suitable for plowing, mowing, and shredding.
Transmission PTO shafts are the oldest type of PTO. They are connected to the tractor’s transmission. When a tractor is in gear, it stops the PTO shaft. However, when it’s not, it’s ineffective and can pose serious problems, such as when mowing. This type of PTO can also cause an overrun clutch to prevent the PTO shaft from working properly.
Reaction time
It’s important to know your reaction time when working around a power take-off (PTO) shaft. This part of the machine rotates at approximately 540 revolutions per minute and can pull in seven feet per second. Reaction time can be affected by age, physical condition, medications, lack of sleep, and stress. If you’re working around a PTO, be sure to remove any loose jewelry or other items that might interfere with your reaction time.
PTO accidents can be caused by several factors. The operator, the machine, and the environment all play a role. The operator’s physical and mental condition can also contribute to unsafe actions. For example, young operators may lack the knowledge and experience to recognize hazards. Older workers may also have slower reaction times, which can make it difficult to react quickly to slippery work areas.
Reaction time is measured as the time between a stimulus and the response. It does not include the time required to move the hand. Reaction time is a critical factor in sports, where athletes need to be quick to respond to the moves of their opponents. A good reaction time is necessary to score points.
A demonstration of the speed of a PTO shaft is a great tool to demonstrate how dangerous this part of a machine can be. To demonstrate the speed, use a 7-foot sash cord tied to a sliding collar universal joint. Select a 540-rpm PTO shaft, and a three-inch diameter shield. In one second, the rotating shaft makes nine revolutions and travels 7.1 feet. However, a cordless drill does not rotate at full speed and will take at least two seconds to wrap around the string.
Standardization
The standardization of PTO shafts in tractors is a major project. The EU Machinery Directive requires the protection of operators from rotating parts, such as the PTO. This is especially important when parts are accessible, as clothing can easily be wrapped around them, resulting in an accident. To prevent such accidents, manufacturers have begun to install non-rotating guards over the PTO drive shaft. These guards comply with the current EU good practice.
The European Standard EN 12965:2003+A2:2009 specifies the safety requirements for PTO drive shafts and their guards. It also specifies safe working practices for these components. The standard was approved by CEN on 16 September 2019. It is important to follow these regulations to ensure safe operation.
In the 1980s, a movement began among agricultural engineers to standardize the PTO shaft. The movement began because the different types of PTO shafts had not been interchangeable. A common example is the Deutz-Fendt shaft, which had become a standard for tractors.
As the power for PTO drives comes from the gearbox, the counter shaft acts as the PTO outlet. Standardization of PTO speeds makes it easier for manufacturers to design equipment to meet a specified speed. For example, a thresher is expected to run at a specific peripheral velocity of the threshing cylinder, which is a function of standard PTO speeds. This also allows designers to plan pulley arrangements with the standard PTO speed in mind.
Safety chains
The PTO shaft is an integral part of a tractor or implement, so it’s essential to secure it with safety chains. These chains are welded to both ends of the shaft and serve as backup connections between the tractor and trailer coupling point. There are several types of chains available, from domestic to metric, to meet your specific needs.
Because of the high speeds of PTO shafts, it’s crucial to protect these parts from being tangled. A single fall of a PTO shaft can cause serious injury or even death. In such an unfortunate situation, safety chains can prevent such injuries. PTO shafts are also extremely dangerous because the components can become hot while they are operating.
In addition to safety chains, operators must also be aware of the hazards that can occur when working near a PTO shaft. Unsafe behaviors, such as performing repairs while operating a machine, or wearing frayed clothing can lead to serious injury or death. In addition, all users should follow the instructions on the tractor or implement they’re using. It’s also essential to use a PTO shaft for its intended purpose.
In addition to safety chains, farmers should also ensure that the PTO drive shaft is securely attached to the tractor or implement. A broken or damaged PTO guard can be just as dangerous as an unprotected shaft. In addition, a poorly fitting PTO guard may provide a false sense of security. For this reason, it’s important to use protective clothing when operating a tractor or implement powered by a PTO.
Shield
The CZPT-Co universal fit PTO shaft shield is a simple and easy to use shield that has a patented lever release. The shield comes in two sizes, the smaller diameter shield is for shafts with a diameter of 1 5/16″ to 2 1/8″ and the larger diameter shield fits shafts of 2″ to 3 1/8″. Each shield is pre-installed with an assortment of bearings. The shield’s length is measured from the end of the yoke bearing groove to the other end.
If you’ve ever tried to work on a PTO shaft, you know that it can be frustrating. A PTO shaft shield is a safety device that covers the shaft and prevents it from rotating. These shields are also designed to be easy to connect and remove. The CZPT safety clip makes it easy to connect or disconnect the shield, and locks into place to prevent it from rotating with the inner driveshaft. The CZPT material used in RPM Transmissions driveline safety shields is strong and rigid.
Another improvement of this PTO shaft shield is the bracket that supports the two-piece PTO shaft and outer shield. The bracket is shown in FIG. 2 as an angled front view. FIG. 7 is a side elevation view of the bracket mounted to the machine tongue.
editor by CX 2023-05-04