محور فولاذي مطلي بالكروم الصلب لقطع غيار ممتص الصدمات في السيارات

محور فولاذي مطلي بالكروم الصلب لقطع غيار ممتص الصدمات في السيارات
رمز المنتج: 1def55ee8176 فئات:
سؤال

Item Detailed instructions
4. The tolerance of quantity: +/- 5%
5.Ultimate tensile energy(minimal)-600N/mm2
six.Yield strengths(minimal)-520N/mm2
seven.Elongation(least)-12%
8.Chemical  composition -normal as for every Steel Quality E-355 (S-T52)
9.Straightness :- .3mm to .5mm / 1000mm
ten.I.D Tolerance as for each above ,O.D Tolerance according to DIN2391, Inner surface  roughness Ra..2μm.
11.Inner Diameter Ovality <=0.02mm and Eccentricity ± 5% of Average wall thickness
12.Interior and Outer Area ought to be free of charge of defects. PITTING, SCRATCH, In excess of LAPPING, SCORES, and so on. 

السلع الأساسية:

Difficult Chrome Plated Rod, JCPT Piston Rod, Cylinder Piston Rod, Chromium Rods, Linear Shafts, SBR Shafts, Difficult Chrome Shaft, Induction Rod, Induction Shaft, and so on.

the variety of Diameters contain: 3-120mm
 

 غرض  OD مم                                                                
Hard Chrome Rod   3 4  5  6  8  10  12  13  14  15  16  17  18  20  22  25  28  30  32  35  40  45  50  55  60  65  70  75  80  85  90  100  110  120 
Induction Tough Chrome Rod  3 4  5  6  8  10  12  13  14  15  16  /  18  20  22  25  28  30  32  35  40  45  50  55  60  65  70  75  80  85  90  100  110  120 

The hard chromium piston rods produced by our firm appear with more than JIS S45C substance, the place the rods first endure precision milling and processing, and are then place through gard surface area chromium therapy, enabling a surface precision amount of f7, and a surface hardness achieving HV800 minimal and up, which not only support to enhance use resistance but also aid to increase the existence cycle of the rods, therefore assisting the JCPTer help save value.

The corrosion resistances is examined in our very own inner salt spray laboratory, and The rods surface warmth remedy and hardness achieving HRC55°±2°, and at a hardened depth of in between .5mm - 3mm, ahead of the rods are set by means of precision milling and challenging chromium therapy for a membrane thickness measuring 20 micron ± 10% to drastically improve the rod's use resistance, and assist to prolong the lifestyle cycle of the rods.

1. Chrome Plated Metal Bars:

Our Chrome Plated Bars are created from medium carbon chilly-finished or scorching rolled metal bars typically in 1045 grades. The bars are centerless floor, polished, and chrome plated to a minimum thickness of .0005", and .001" per facet. 
Chrome Plated bars are particularly made to be utilized for most piston rod programs in hydraulic and pneumatic cylinders.

two.  Induction Hardened Chrome Plated Bars:

Our  Induction Hardened Chrome Plated Bars are created by employing superior processing tactics usually on JIS S45C, SAE1045 or DIN CK45 steel rods, for surface area elimination, polishing, induction hardening, adopted by challenging chrome plating to a thickness minimal of .0005" or .001" for each facet. The completed solution benefits in a superior influence resistant bar excellent for large good quality piston rods able of managing tough environments.

البرامج:

الحركة الخطية Xihu (بحيرة الغرب) Dis.s، قضبان أسطوانية JCPT
plastic injection molding devices, building gear, rubber molding devices, papermaJCPTs, printing equipment, refrigeration tools, foods and chemical machinery, loading gear, fiber spinning products, textile machinery, agricultural tools, automotives, shipbuilding and the like.

3. الأنابيب الميكانيكية غير الملحومة المسحوبة على البارد (CDS)

is a cold drawn 1571 metal tube. Made from piercing hot rolled bar stock, the cold drawing process will increase the tube's actual physical qualities decreasing the value of equipment time. Cold drawn seamless tubing gives a better uniformed OD and ID, improved machinability, enhanced toughness, and tighter tolerances compared to very hot finish seamless merchandise

الأهداف:

أسطوانات JCPT
قطع غيار الشاحنات وقطع غيار السيارات من JCPT
JCPT equipment
Agricultural factors
محاور JCPT ومحاور الشاحنات، ومكونات نظام التعليق وممتصات الصدمات
Higher Speed Shafts and rollers
JCPTs and Spacers, Roll cages, and a lot of other machined tubular elements.

If you are interested in our company, make sure you really feel free of charge to make contact with us:

شركة هانغ جيه سي بي تي ويبينغ للآلات الدقيقة المحدودة
Add: No.217 Ruiqi Constructing, No.668 Fengting Street, HangJCPT JCPT Park P.R.C
 
 
 http://chromedbars.en.created-in-china.com
http://chromedbars.en.manufactured-in-china.com
 

محور فولاذي مطلي بالكروم الصلب لقطع غيار ممتص الصدمات في السيارات

المنتجات ذات الصلة

عمود نقل الحركة للجرار

بصفتنا أحد الشركات الرائدة في تصنيع وتوريد وتصدير أعمدة نقل الحركة للجرارات، فإننا نقدم أعمدة نقل الحركة للجرارات والعديد من المنتجات الأخرى.

يرجى الاتصال بنا للحصول على التفاصيل.

البريد الإلكتروني: [email protected]

مصنع ومورد ومصدر لعمود نقل الحركة للجرارات.

[crp]