إذا كنتم مهتمين بأي من منتجاتنا أو ترغبون في مناقشة طلب محتمل، فلا تترددوا في الاتصال بنا. – مجموعة EPG، أكبر مصنع لصناديق التروس الزراعية ووحدات نقل الحركة في الصين، ولديها 5 فروع. لمزيد من التفاصيل: تواصلوا معنا عبر الهاتف/واتساب/تيليجرام/كاكاو على الرقم: 0086-13083988828
Center Pivot irrigation has been proven to be the most cost-effective irrigation system in the industry.Good performance on wather spray uniformance on wather spray uniformity, high efficiency and labor saving. Helping to overcome runoff,while increasing yield and save water. From the pivot point to the overhang, our center pivots are engineered, constructed, and field-tested to outperform any other equipment in your field.
Pivot, also called center pivot or cl post hole auger gearbox Izmir Turkey ock pivot, is a large-scaled automatically running irrigation equipment, quite suitable for corn, wheat, alfalfa, potato, grain, vegetable and sugarcanes and cash crop etc, and even good for fruit tree, plant nursery A single pivot could cover a very large field. Comparing with the other irrigation way, the pivot has the following advantage:
1.The largest irrigation covering.
No need digging or much earthwork, only water recourse like ept or surface water, one single pivot could cover 1200acres within a short time. Bigger field, smaller investment.
2. Highest mechanical and automatic irrigation way.
One single labor could manage 10000acres field, as far as increasing productivity.
3. Water saving 30%~50%, spray uniformity reach 90%, adjust field climate, 20%~50% increasing of productivity is approved obviously.
4. Equipping with other agriculture machine to achieve irrigating, seeding, fertilizing, gathering in one step.
Technical parameters of center pivot irrigation system
| لا. | غرض | Span Specification |
| 1 | Center Pivot | 6 5/8”(168mm) or 8 5/8”(219mm) |
| 2 | Pipe Spec. | 5”(127mm);6 5/8”(168mm)or 8”(203mm) |
| 3 | Span Length | 37.5m;43.3;49.1;54.9;or 60.7 |
| 4 | Tire Spec. | 14.9-24 or 11.2-24;including Vacuum and inner tube |
| 5 | Cable Spec. | Armored Cable,passed the UL certification |
| 6 | محرك | UMC25.5:1(1.5hp) or UMC40:1(0.75hp) |
| 7 | علبة التروس | UMC50:1 or ept 52:1 |
| 8 | Length of OH | 2.7m,5.5m,8.2m,11m,16.5m,19.5m or25m |
| Notice: 8 5/8”(219mm) pipes only suit to spans in 43.3m and 49.1m | ||
Parameters of different spans
| القطر | Length(m) | Outlet Spacing | Crossing Altitude | G.W with water |
| 219 mm | 43.3 m | 192 cm or 288 cm | 2.99 m | 3410 kg |
| 49.1 m | 2.93 m | 3770 kg | ||
| 168 mm | 43.3 m | 192 cm or 288 cm | 2.99 m | 2580 kg |
| 49.1 m | 2.93 m | 2830 kg | ||
| 54.8 m | 2.86 m | 3080 kg | ||
| 60.6 m | 2.83 m | 3320 kg | ||
| 127 mm | 43.3 m | 192 cm or 288 cm | 3.02 m | 2160 kg |
| 49.1 m | 2.96 m | 2350 kg | ||
| 54.8 m | 2.89 m | 2580 kg | ||
| 60.6 m | 2.86 m | 2730 kg |
إن استخدام أرقام قطع الغيار أو العلامات التجارية الخاصة بمصنّعي المعدات الأصلية (OEM)، مثل CASE® وJohn Deere®، هو لأغراض مرجعية فقط ولتوضيح استخدام المنتج وتوافقه. شركتنا وقطع الغيار البديلة المذكورة هنا ليست برعاية أو موافقة أو تصنيع مصنّع المعدات الأصلية.
